Portable Underground Cable Fault Locator Set Tdr 2048j Discharge Power

• Customization: Available
• After-sales Service: Support
• Warranty: 1 Year
• Model NO.: XHHV535-4TS+XHGG502+XHDD503C+XHGX507
• Connectors: USB
• Test Mode: Instant Test
• Usage: Audio Cable Tester, Coaxial Cable Tester, Digital Cable Tester
• Test Region: Forming Cable
• Cable Type: Shielded
• Power: Electricity
• Certification: CE, IEC
• Customized: Customized
• Color: Black
• Voltage Level: 0-32kv
• Discharge Energy: 2048j
• Impact Time: 7 Seconds
• Impact Power: 2kVA
• Measuring Distance: 65km
• Transport Package: Wooden Case
• Specification: 83*64*107
• Trademark: XZH TEST
• Origin: Shaanxi
• Package Size: 83.00cm * 64.00cm * 107.00cm
• Package Gross Weight: 260.000kg

Product Description

 

Portable medium voltage cable fault locating system
 

Cable fault pre-location: with the reflectometer XHGG502 based on the low-voltage impulse reflection method(TDR), and high-voltage decay (ICE) method DECAY and ARC method. XHDD503C uses acoustic-magnetic synchronization method, equipped with 2048 J surge generator and intelligent digital signal receiver. cable pipe locator: XHLJ507 is an multifunctional equipment, with this equipment, you can realize of cable path tracing, buried depth detection, cable fault point precise location. High voltage 2048 J surge generator XHHV535-4TS is accompanied by a surge levels switch which allows to achieve the maximum surge impulse energy at 8, 16 and 32 kV. It has features operator safety assurance systems and provides a reliable and comprehensive technical solution for low- and medium-voltage cables faults.
 

 

High Voltage Pulse Generator XHHV535-4TS

Impulse voltage: 0~32kV,0~16kV,0~8kV(Adjustable)
High voltage partial pressure: 1.5 level
Built-in capacitor: 4μF/32kV,16μF/16kV,64μF/8kV Adjustable three-speed adjustment 
Discharge power: both are 2048J
Impact time: about 5 seconds for automatic impact, arbitrary control time for manual impact 
Surge power: 2KVA
Working power supply: AC 220V±10% / 50Hz±2Hz(60Hz can be customized)
Ambient temperature: -20~+50ºC

ARC Cable Fault Pre Locator XHGG502

Sampling frequency: 400MHz;
Minimum resolution:0.5m(100m/us)
Low voltage pulse width:0.2uS
Test blind spot:≤20m
Ranging range: ≤65km
Measurement error:≤±(0.5%×L+1m),L is the cable length
Working conditions: temperature -25ºC~+65ºC, relative humidity 85%, atmospheric pressure 750±30mmHg;

Cable Fault Pin pointer XHDD503C

Sound channel-Bandwidth:
    All-pass: 100Hz~1500Hz.
    Low pass: 100Hz~400Hz.
    High pass: 150Hz~1500Hz.
    Band pass: 200Hz~600Hz.
Signal gain: adjustable from 0 to 7.
Fixed point accuracy: 0.1m.
Magnetic field channel: adjustable from 0 to 7.
Battery: lithium-ion battery pack, voltage 8.4V, capacity 4.4Ah
Charger: Input AC220V±10%, 50Hz
Display mode: 7-inch color LCD, 1024*600 resolution, with touch function
 

 

Underground Cable Pipe Locator XHGX507

Transmitter frequency: from 815Hz-83KHz(4 kinds)
Output power: maximum 10W
Output current: 0~2A 
Battery model:  rechargeable lithium batteries 
Receiving frequency: Detection frequency from 815Hz-83KHz
Passive frequency: 50Hz, radio
Depth measurement:  10 meters
Positioning accuracy : Low frequency: ±(1-5)%≤2.5m Radio frequency: ±(5-12)%≤2.5m
Maximum detection distance: The cable with good insulation in the direct connection method can reach up to 15km.
 

Technical Parameters

Transmitter

Working frequency	low frequency (815Hz), intermediate frequency (8kHz), high frequency (33 kHz), radio frequency (83 kHz)
Working mode	direct connection method, coupling method (caliper method), induction method
Matching load	5 ohms-3000 ohms
Impedance display	5 digits
Overheating and over current	automatic protection
Power output	low gear, middle gear, high gear

Receiver

Working frequency	low frequency (815Hz), intermediate frequency (8kHz), high frequency (33 kHz), radio frequency (83 kHz),  Passive frequency 50Hz
Antenna mode	valley method (zero value mode), crest method (peak mode), step voltage method and clamp current method (A-frame)
Current indication	display the effective current value of the cable under test (unit: mA)
Working temperature	-10ºC+55ºC
Power indicator	graphic display
Battery life	continuous work> 8 hours: intermittent work> 16 hours
Signal strength indication	ladder diagram, digital range 0-999
Gain control	manual adjustment, dynamic range of 100dB
Detection depth	the maximum detection depth is around 10 meters
Maximum detection distance	The cable with good insulation can be up to 15km in the direct connection method
Depth measurement	press the depth key to display three digits, the maximum depth can be measured up to 10 meters
Accuracy	Low frequency: ±(1-5)%≤2.5m Radio frequency: ±(5-12)%≤2.5m