XHSB505B This product is developed based on the on-site identification problem of multiple cables that high-voltage cable construction, installation and maintenance personnel urgently need to solve. It refers to foreign advanced technology, is guided by electromagnetic field theory, and uses modern electronic technology and tooling technology.
In on-site operations such as power cable laying, migration, maintenance, and troubleshooting, a very difficult problem is often encountered: Which cable are we looking for? Especially in many cable trenches of the same specification, the construction personnel are helpless. This device can help you solve this problem quickly and accurately.
Identification of non-powered cable: The transmitter mainly generates a special pulse signal. This signal is added to the cable to be identified through a connecting line. According to the principle of electromagnetic induction, an induction signal consistent with the law of the transmitted signal will inevitably be generated along the cable. At the test site, a highly sensitive receiving clamp plus a handheld receiver is used to detect all cables on the site. According to the indication of the handheld receiver, the cable to which the signal is added (i.e., the non-powered cable to be identified) can be accurately found.
Identification of powered cable: The transmitter mainly generates a special pulse signal. This signal is added to a point of the powered cable to be identified through a special transmitting clamp. According to the principle of electromagnetic induction, an induction signal consistent with the law of the transmitted signal will inevitably be generated along the cable. At the test site, a highly sensitive receiving clamp plus a handheld receiver is used to detect all cables on the site. According to the indication of the handheld receiver, the cable to which the signal is added (i.e., the powered cable to be identified) can be accurately found.
Parameters:
Identification method: judge by the direction of needle swing;
Jaw: Φ125mm;
Output voltage: I level (direct connection method): 250V II level (coupling method): 600V;
Test range: direct connection method: 0Ω~1.5k
Coupling method: 0Ω~40Ω;
Pulse current: 0~15A;
Pulse period: 2.5S/time;
Power supply: transmitter 12VDC lithium battery, handheld receiver 5 battery.
*Accurate identification
*Large identification jaws suitable for all kinds of cables
*Extremely simple operation
*Clear and intuitive instructions
*Main and auxiliary parts are portable and beautiful
*The receiver has adjustable signal strength
*Both live and non-live cables can be tested
*Small and portable, light weight
| Transmitter |
1 set |
| Receiver |
1 set |
| Charger |
1 set |
| Output line - red |
1 set |
| Output line - black |
1 set |
| Transmitter clamp |
1 set |
| Receiver clamp |
1 set |
| Batteries |
2 sets |
){kind=link}