Transformer Oil Open-Cup Flash Point Auto-Tester

• Customization: Available
• After-sales Service: Warranty
• Warranty: 1 Year
• Model NO.: XHKS183
• Connectors: Coaxial BNC
• Test Mode: Instant Test
• Usage: Transformer Oil Tester
• Test Region: Unformed
• Power: Electricity
• Certification: ISO
• Customized: Customized
• Color: White
• Display: Color Liquid Crystal Display
• Information Storage: 500
• Printer: DOT Matrix Printer
• Power Supply: 220V ±11V, 50Hz±2.5Hz
• Transport Package: Wooden Box with Foam Inside
• Specification: 17kg
• Trademark: XZH TEST
• Origin: China Xi′ an
• Production Capacity: 10000

Product Description

Product Description

Automatic analyzer  to open flash point, flash point of petroleum products Determination of value.
The instrument adopts electric ignition mode, without any combustible gas, fully comply with ASTMD92 (GB3536-2008), GB267-88 method. ARM series of high performance microprocessor, electric erase memory (which can be stored on a thousand data), color LCD and touch screen, PID from the whole set of the latest technology. The instrument has the following characteristics:
     Very strong function. A dual-purpose machine at the same time determination of flash point and ignition point, and print the test results, with internal clock chip, automatically display the current date, time, power down to keep the.
 High precision. The temperature error was controlled at 1.5, and the resolution was 0.1.* good repeatability.
 Test environment in the guarantee, consistent with 267-88 GB3536 (ASTM D92) or GB / T for continuous measurement of the same samples, both flash point value difference is less than or equal to 4 degrees centigrade.
     A high degree of automation. Can automatically complete the testing process, automatic cooling, automatic information tips, etc..
    Open flash point determination instrument function and performance at home and abroad and the highest level standards, oil, electricity, chemical industry, commodity inspection and other industries to replace imported products of special instruments.
 

Product Parameters

Range	40 ~400
Detection type	flash point or light
Temperature test	platinum resistance
Display device	color liquid crystal display
Information storage	500 measurement results can be stored
Ignition mode	electric ignition
Cooling method	forced air cooling
Printer	dot matrix printer
Self check function	lift rod, stroke, print, etc.
Power	less than 600VA
Power supply	220V±11V, 50Hz±2.5Hz
Ambient temperature	10~35
Ambient humidity	less than 90%
Weight	about 17kg

Working principle
The instrument according to the temperature curve of GB/T3536-2008 ASTMD92, GB / T 267-88 method. By the CPU control heater to heat the sample, color LCD display, temperature and setting value, the sample temperature close flash point value, CPU controlled electric ignition system, automatic ignition, automatic paddle sweep. In the flash point instrument automatic locking point value. At the same time, automatically stop heating and air cooling of the heater.
Using method
(a) installation environment
Open flash point tester should be installed in the table without direct sunlight, without air convection on. (best placed in the hood, not a fan like).
(b) power supply
The instrument uses 220V, 50Hz single-phase AC power supply, voltage fluctuations should not be greater than 5%. Electronic AC voltage stabilizer (1000W) can also be used.
(c) instrument use
1, connected to the power, the instrument will automatically lift the lifting lever, and there is a prompt tone, display instrument name and version number.
2, click on the screen at any position, display test interface:

Packaging & Shipping