| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
XHGX507B underground cable pipe locator is mainly used for cable fault location, cable identification, cable path and depth measurement. It can complete tasks that could only be accomplished by a few sets of instruments in the past.
1) Compass and direction display
2) Current direction measurement, eliminating interference from adjacent lines (partial frequencies).
3) Depth and current measurement.
4) Fully digital high-precision sampling and processing
5) Live cale detection
6) Cable/pipeline identification
7) Ground fault search: Use the A-frame (optional accessories) to locate the ground insulation damage point of the pipeline, and the arrow indicates the direction of the fault point.
8) Multiple detection frequencies: active detection and passive detection.
9) Multiple signal output modes of the transmitter: direct output, caliper coupling, induction.
10)Transmitter digital power amplifier power output, fully automatic impedance matching, and fully automatic protection.
11)Built-in large-capacity lithium-ion battery, automatic shutdown when undervoltage, automatic shutdown when no operation for a long time (receiver).
12)Beautiful and sturdy casing, light and portable.
Transmitter:
| Working frequency | 348Hz,624Hz,1280Hz,1860Hz,512Hz,645Hz,820Hz,940Hz,6KHz,8kHz,9kHz,12KHz,33kHz,82kHz,200kHz |
| Working mode | direct connection method, coupling method (caliper method), induction method |
| Direct output voltage | up to 200Vpp. |
| Human-machine interface | 320×240 dot matrix LCD display. |
| Overheating and over current | automatic protection |
| Power output | Maximum 10W, 10 levels adjustable, fully automatic real-time impedance matching |
| Built-in battery: | 6pcs 18650 lithium-ion batteries, nominal 12.6V, 4.2Ah. |
Receiver:
| Working frequency | 348Hz,624Hz,1280Hz,1860Hz,512Hz,645Hz,820Hz,940Hz,6KHz,8kHz,9kHz,12KHz,33kHz,82kHz,200kHz,Power frequency passive detection frequency: 50Hz/60Hz. |
| Antenna mode | wide peak method, narrow peak method, sound valley method, peak valley method. |
| Cable identification mode | caliper (optional) intelligent identification and current measurement. |
| Battery life | continuous work> 8 hours: intermittent work> 16 hours |
| Signal strength indication | ladder diagram, digital range 0-999 |
| Gain control | manual adjustment, dynamic range of 100dB |
| Human-machine interface | 480×272 dot matrix LCD display. |
| Built-in battery | 4 pcs 18650 lithium-ion batteries, nominal 4.2V, 8.2Ah. |
| Depth measurement | press the depth key to display three digits, the maximum depth can be measured up to 10 meters |
| Accuracy | Low frequency: ±(1-5)%≤2.5m Radio frequency: ±(5-12)%≤2.5m |
){kind=link}