Portable Cable Fault Locator for Underground Power Cable Test 2000j Hv Pulse Generator

• Customization: Available
• After-sales Service: Warranty
• Warranty: 1 Year
• Model NO.: XHHV535-4TS
• Usage: Digital Cable Tester
• Power: Electricity
• Certification: CE, ISO
• Customized: Non-Customized
• Color: Black
• Output Voltage: 0-8/16/32kv
• Discharge Energy: 0-2048j
• Transport Package: Wooden Box with Foam Inside
• Trademark: XZH TEST
• Origin: China Xi′an
• Production Capacity: 1000pieces/Year

Product Description

 

Product Description

Description

The XHHV535-4TS high voltage pulse generator can be used impulse discharge and withstand voltage test in low and high voltage cable fault test. High-precision test cable fault sampling waveform module and small transformer are installed inside, which can truly achieve the effect of not being damaged by impact, and it also has the functions of automatic timing impact, manual impact and withstand voltage test.

Panel introduction
1. Ammeter: Indicates the size of the current.
2. Voltmeter (Voltmeter): high-voltage output voltage indicating kV meter, divided into 8kV, 16kV, 32kV combined with voltage level switch readings.
3. High-voltage lamp (HV): On means there is high-voltage output, and off means there is no high-voltage output.
4. Power light: When the power switch is turned on, the indicator light lights up.
5. Zero light (Zero): Indicates that the voltage regulating knob is in the zero position. Only when the zero light is on can the high voltage be started.
6. Overcurrent protection switch: When pressed, it indicates that the overcurrent protection function has started; when it pops up, it indicates that the instrument has triggered the overcurrent protection.
7. Power Switch: Turn clockwise to turn on the system power supply, turn counterclockwise to turn off the system power supply.
8. Single key (Single): This key is effective when the mode selection key is in the Single function.
9. Mode select: divided into three modes: voltage resistance (DC), single (Single), and cycle (Cycle). DC is the voltage withstand function. When this function is selected, the cable will be tested for voltage resistance at this time; Single is the manual function. When this function is selected, the voltage will increase after the high voltage starts. Press the Single key to manually trigger the impact discharge; Cycle is an automatic function. When this function is selected, the high voltage is started to boost the voltage. The instrument will automatically trigger impulse discharge for about 7 seconds.
10. Start button: In the zero position, press the start button. At this time, the high voltage starts and the high voltage light turns on. In the non-zero state, the starting high-pressure light does not light up.
11. Voltage control: When this knob is in the zero position, the zero light is on and the high voltage can be started. Only after the high voltage is started can the voltage be boosted through the voltage regulating knob.
12. Stop key: When the test is completed or an abnormality occurs, press this key to cut off the high-voltage output. At this time, the remaining high voltage under test will also be automatically discharged.
13. Voltage rotation mode (Voltage select): This button has three voltage level modes, 8kV, 16kV, and 32kV. Please rotate it to the appropriate position before turning on the machine. Lift, turn, press.

Technical parameters
 

High voltage surge generator XHHV535-4TS	Surge voltage levels and adjustment ranges	Level 1 : 0-8KV Level 2: 0-16KV Level 3: 0-32KV
	Surge voltage levels switch	Manual
	Voltage adjustment type	Continuous
	Indication	High-voltage side voltage metering, indication of output voltage and current in real time
	Surge energy at each level	Up to 2048J
	Operating mode	Single trigger, cycle, DC
	Operating modes switch	Manual
	Impact time	about 7 seconds for automatic impact, arbitrary control time for manual impact
	Impact power	2KVA
	Continuous output current	60mA
	Built-in capacitor	4μF/32kV, 16μF/16kV, 64μF/8kV three-speed adjustment
	Safe operation	With zero start protection function, safe and reliable
	Discharge	Unique high-voltage measurement design, in the stop state, it will automatically discharge the internal capacitance of the device
	Working power	AC 220V±10% 50Hz±2Hz (other voltage and frequency can be customized)
	DC withstand voltage testing	Output voltage adjustment and indication range 0-32KV, Output current indication range 0-20A
	Burn current	Fault conditioning (burning) with current up to 60 mA @ 32 kV, 120 mA @ 16kV, 240mA@8kV.
	Connecting cable	High voltage output cable: 5m, Protective earthing cable:5m,power cord 2.5m. Cables can be customized according to customer requirements.
	Safety	Over-voltage, Over-current, Overheating protection. Automatic discharge after operation.
	Protection rating	Not lower than IP54
	Working power	AC 220V±15%, 50Hz±2Hz
	Dimensions(mm)	534L×444W×805H
	Total weight	About 120kg

Packing List
Onsite testing case