| Customization: | Available |
|---|---|
| After-sales Service: | Warranty Certificate |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The XHLJ504 cable pipe locator is a special instrument used to accurately detect the direction and depth of buried cables within a certain range;
The path detection is completed by the path signal generator and the path signal receiver (cable fault locator) in cooperation with the test; through the cooperation between them, the cable path can be accurately located within the approximate cable buried range.
Main components
Path detection is mainly composed of path signal generator and receiver
1. Path signal generator
The path meter is a high-power path signal generator required to detect the buried cable path.
Main technical index parameters
| Large output power, strong anti-vibration and anti-interference ability, stable and reliable; | |
| It has reliable over-current, open-circuit and short-circuit protection functions; | |
| Output frequency | audio; |
| Output signal | intermittent, 0~50Vpp |
| Working power supply | 220V (1±10%) 50Hz (1±5%); |
| Output power: | 100W; |
| Output current | 0~2A; |
2. Path receiver (cable fault pointing instrument)
Receive the path signal sent by the cable path instrument, so as to accurately detect the buried depth and direction of the cable.
Receiving mode: Magnetic sound synchronization
Receiving frequency: audio frequency
Magnification: 50,0000 times
output impedance :350Ω
Positioning accuracy:±0.2m
Power dissipation: Quiescent current is less than 10mA, The working current is not more than 10mA
Power supply: DC 9V Battery power
Dimension :200*150*80mm
Weight:1.5kg
Operating temperature:-10 ~ 55°C
| Item | Name | Qty. |
| 1 | cable fault route tracer | 1 |
| 2 | cable fault pin pointer | 1 |
| 3 | power cable | 1 |
| 4 | audio Line | 1 |
| 5 | single Q line | 1 |
| 6 | double Q line | 1 |
| 7 | probe | 1 |
| 8 | output line for path/identification-red | 1 |
| 9 | output line for path/identification-black | 1 |
| 10 | Transparent ground wire | 1 |
| 11 | Fuse 3A | 2 |
| 12 | Path probe | 1 |
| 13 | sampler | 1 |
| 14 | Headphones | 1 |
| 15 | battery 9V | 2 |
| 16 | cable connection | 1 |
| 17 | sphere gap | 1 |
| 18 | discharge rod | 1 |
| 19 | strap | 1 |
Our team
){kind=link}