| Customization: | Available |
|---|---|
| After-sales Service: | Warranty |
| Warranty: | 12 Mouth |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
XHGX507B(With compass)The pipeline locator uses the principle of electromagnetic induction to detect the precise direction and depth of underground cables and locate cable open circuits, short circuits and outer sheath fault points. The pipeline locator's intelligence, graphic operation instructions and sound frequency modulation instructions make it the most popular one today. Easy-to-use pipeline locator.
1. Receiver
1. Input method: built-in receiving coil, identification clamp (optional), troubleshooting A-frame (optional).
2. Detection frequency:
256Hz, 286Hz, 320Hz, 380Hz, 460Hz, 640Hz, 1280Hz, 1860Hz, 512Hz, 570Hz, 577Hz, 640Hz, 760Hz, 870Hz, 920Hz, 940Hz, 8KHz, 9KHz, 33KHz, 65KHz, 83KHz, 131KHz, 200kHz,
Power frequency passive detection frequency: 50Hz/60Hz, radio passive detection frequency, low frequency.
3. Pipeline detection modes: wide peak method, narrow peak method, sound valley method, peak valley method.
4. Cable identification mode: caliper (optional) intelligent identification and current measurement.
5. Human-machine interface: 480×272 dot matrix LCD display.
6. Built-in battery: 4 18650 lithium-ion batteries, nominal 4.2V, 8.2Ah.
7. Positioning depth 0-6m; when measuring depth, the depth of the pipeline under test is 0-3m (accuracy ±5%), and the depth of the pipeline under test is 3-12m (accuracy ±10%)
2. Transmitter
1. Output mode: direct output, induction, caliper coupling.
2. Output frequency: 256Hz, 286Hz, 320Hz, 380Hz, 460Hz, 640Hz, 1280Hz, 1860Hz, 512Hz, 570Hz, 577Hz, 640Hz, 760Hz, 870Hz, 920Hz, 940Hz, 8kHz, 9kHz, 33kHz, 65Hz, 83kHz, 131KHz, 200kHz .
3. Output power: maximum 10W, 10 levels adjustable, fully automatic real-time impedance matching.
4. Direct connection output voltage: up to 400Vpp.
5. Overload and short circuit protection.
6. Human-machine interface: 320×240 dot matrix LCD display.
7. Built-in battery: 6 18650 lithium-ion batteries, nominal 12.6V, 4.2Ah.
3.Others:
1. Volume: transmitter 320×240×90mm, receiver 670×128×310mm.
2. Mass: transmitter 1.9kg, receiver 1.4kg.
3. Charger: input AC100~240V, 50/60Hz, output DC4.2V-1A, output DC12.6V-1A.
4. Conditions of use: Temperature: -20ºC-70ºC, humidity 5-90%RH, altitude <4500m.
Features
lCompass and direction display: visually display the pipeline direction and left and right directions.
lCurrent direction measurement, eliminating line interference (partial frequencies).
lDepth and current measurement.
lFully digital high-precision sampling processing: stable and reliable, ultra-high sensitivity, extremely narrow receiving frequency band, strong anti-interference ability, and can fully suppress power frequency and harmonic interference from nearby running cables and pipelines.
lRunning cable detection: High-performance transmitting caliper, coupling the output signal to the running cable to the greatest extent.
lCable/pipeline identification: The flexible caliper (optional accessory) is easy to use and clearly gives the identification results; it can be used when it is inconvenient to use the caliper.
lGround fault finding: Use the A-frame (optional accessory) to locate the damaged point of the pipeline's insulation against the ground, and the arrow indicates the direction of the fault point.
lMultiple detection frequencies: active detection and passive detection.
lThe transmitter has multiple signal output modes: direct output, caliper coupling, and induction.
lTransmitter digital power amplifier power output, fully automatic impedance matching, fully automatic protection.
lBuilt-in large-capacity lithium-ion battery, automatic shutdown when under voltage, automatic shutdown (receiver) if no operation for a long time.
lThe casing is beautiful, sturdy, lightweight and portable.
| Serial number | Name | quantity |
|
1
|
Receiver | 1 |
|
2
|
Transmitter | 1 |
|
3
|
Transmitter direct output cable | 1 |
|
4
|
Coupling clamp cable | 1 |
|
5
|
Ground wire | 1 |
|
6
|
Charger | 2 |
|
7
|
Ground bridge | 1 |
|
8
|
Coupling clamp | 1 |
| Serial number | Name | Drawings and instructions |
| 1 | Identify connecting cables |
(Blue 9-pin plug)
|
| 2 | A bracket connection cable |
(Blue 9-pin plug)
|
| 3 | Identifying forceps |
|
| 4 | Identifying forceps |
|
){kind=link}