| Customization: | Available |
|---|---|
| After-sales Service: | Warranty |
| Warranty: | 12 Mouth |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
XHLJ504LThe cable fault path meter is a special instrument used to accurately detect the direction and depth of buried cables within a certain range;
Path detection is completed by the joint testing of the path signal generator and the path signal receiver (cable fault locator); through their cooperative operation, the cable path can be accurately positioned within the approximate cable burial range.
Operation panel introduction:
1. Output positive pole: The signal source output is positive, connected to the phase wire of the cable;
2. Output negative pole: The negative output of the signal source is connected to the ground wire of the wire;
3. Overload indication: Overload indicator light, which lights up when the output is short-circuited or the signal is too large;
4. Output adjustment: Output amplitude adjustment knob, which can change the output amplitude;
5. Start button: When the overload light is on, after reducing the output amplitude, pressing this button can restart the signal generator to re-output the path signal;
6. Power switch: Turn on the power to make the path meter work, and the indicator light will light up at the same time;
Insurance tube: 2A insurance tube; there is a spare inside;
Power input: input 220V (1±10%) 50Hz (1±5%);
7. Grounding post: The test site is connected to the safe earth;
8. Output meter: When the meter pointer swings, it means there is an output signal; when the pointer does not move, it means there is no output signal; the amplitude of the pointer swing indicates the amplitude of the output signal (that is, the output trend value becomes larger or smaller. , does not represent the specific unit value size);
Technical parameter
| High output power, strong anti-vibration and anti-interference capabilities, stable and reliable; | |
| Has reliable overcurrent, open circuit and short circuit protection functions; | |
| Output frequency | audio; |
| Output signal | intermittent, 0~50Vpp |
| Working power supply | 220V (1±10%) 50Hz (1±5%); |
| Output power | 100W |
| Output current | 0~2A |
){kind=link}