| Customization: | Available |
|---|---|
| After-sales Service: | Warranty |
| Warranty: | 12 Mouth |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The pipeline locator uses the principle of electromagnetic induction to detect the precise direction and depth of underground cables and locate cable open circuits, short circuits and outer sheath fault points. The pipeline locator's intelligence, graphic operation instructions and sound frequency modulation instructions make it the most popular one today. Easy-to-use pipeline locator.
1. Receiver
Working frequency: low frequency, medium frequency, high frequency, radio frequency 50HZ
Antenna mode: valley method (vertical coil), crest method (horizontal coil)
Audible indication: FM tones that vary with signal strength
Current indication: displays the effective current value of the cable under test (unit: mA)
Working temperature: -10°C--+55°C
Battery model: rechargeable battery
Battery indication: graphic display
Battery life: continuous working >8 hours: intermittent working >16 hours
Size: 70×20×11CM
Weight: 3kg (with battery)
Signal strength representation: ladder diagram, digital range 0-999
Gain control: manual adjustment, dynamic range is 100db
Detection depth: Maximum detection is not less than 10 meters
Maximum detection distance: up to 15KM with well-insulated cable in direct connection method
Depth measurement: Press the depth key, three-digit display, the maximum depth can be measured up to 2.5 meters
Accuracy*: Low frequency: ±(1-5)%≤2.5 meters Radio frequency: ±(5-12)%≤2.5 meters
*Depends on site environment, shape of non-concentric wires, number of adjacent pipelines, and soil return current
2. Transmitter
Working frequency: low frequency, medium frequency, high frequency, radio frequency
Working mode: direct connection method, coupling method, induction method
Matching load: 5 ohms - 3000 ohms
Impedance display: five digits
Overheating and overcurrent: automatic protection
Power output: low gear, mid-range, high gear
Battery type: 8 AA alkaline batteries
Battery life: 4 hours to 8 hours of continuous operation depending on frequency of use and output power
Intermittent working for 6 hours to 10 hours depending on the frequency of use and output power
Working temperature: -10°C-55°C
Size: 16×16×39CM
Weight: 4kg (including battery)
| Serial number | content | purpose |
| 1 | Standard configuration (transmitter + receiver) |
Path detection of uncharged cable and short-circuit fault detection by audio method. |
| 2 | Standard configuration + transmitter clamp |
Path detection of uncharged or live cables and short-circuit fault detection by audio method. |
| 3 | Standard configuration + receiver clamp | Path detection of dead cable, short-circuit fault detection by audio method, and identification of dead cable. |
| 4 | Standard configuration + A-frame | For the path detection of uncharged cables, the audio method is used to detect the short-circuit fault, and the A-frame method is used to detect the grounding fault of uncharged cables. |
| 5 | Standard configuration +transmitter clamp + receiver clamp | Path detection of dead or live cables, short circuit fault detection by audio method, and identification of dead or live cables. |
| 6 | Standard configuration + transmitter clamp + A-frame | Path detection of uncharged or live cables, short-circuit fault detection by audio method, and grounding fault detection of cables without armor by A-frame method. |
| 7 | Standard configuration +receiver clamp + A-frame | Path detection of uncharged cables, short-circuit fault detection by audio method, grounding fault detection of uncharged cables by A-frame method, and identification of uncharged cables. |
| 8 | Standard configuration + transmitter clamp + receiver clamp + A-frame | Path detection of uncharged cable or live cable, short-circuit fault detection by audio method, grounding fault detection of uncharged cable by A-frame method, and identification of uncharged or live cable. |
| Serial number | Name | quantity |
|
Receiver | 1 |
|
Transmitter | 1 |
|
Direct signal line | 1 |
|
Coupling line | 1 |
|
Ground drill | 1 |
|
Charger | 1 |
|
Ground wire | 1 |
|
A frame | 1 |
|
A frame cable | 1 |
|
A-frame probe | 2 |
|
Launch clamp | 1 |
|
Receiver clamp | 1 |
){kind=link}