| Customization: | Available |
|---|---|
| After-sales Service: | Warranty |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Range | 40 ~350 |
| Temperature test | platinum resistance |
| Display device | color liquid crystal display |
| Information storage | 1000 analysis results can be stored |
| Ignition mode | electric ignition |
| Cooling method | forced air cooling |
| Printer | thermal printer |
| Self check function | lift rod, stroke, print, etc. |
| Power | less than 350VA |
| Power supply | 220V±10V, 50Hz±2.5Hz |
| Ambient temperature | 10~35ºC |
| Ambient humidity | less than 85% |
| Weight | about 17kg |
Working principle
The instrument according to the temperature curve of GB/T3536-2008 ASTMD92, GB / T 267-88 method. By the CPU control heater to heat the sample, color LCD display, temperature and setting value, the sample temperature close flash point value, CPU controlled electric ignition system, automatic ignition, automatic paddle sweep. In the flash point instrument automatic locking point value. At the same time, automatically stop heating and air cooling of the heater.
Using method
(a) installation environment
Open flash point tester should be installed in the table without direct sunlight, without air convection on. (best placed in the hood, not a fan like).
(b) power supply
The instrument uses 220V, 50Hz single-phase AC power supply, voltage fluctuations should not be greater than 5%. Electronic AC voltage stabilizer (1000W) can also be used.
(c) instrument use
1, connected to the power, the instrument will automatically lift the lifting lever, and there is a prompt tone, display instrument name and version number.
2, click on the screen at any position, display test interface:
){kind=link}