| Customization: | Available |
|---|---|
| After-sales Service: | Warranty |
| Warranty: | 12 Month |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This device is a high-performance underground metal pipeline detection system, consisting of a signal transmitter and a receiver. It can be used for path detection, pipeline survey and depth measurement of metal pipelines and underground cables. With a variety of optional accessories, it can perform unique Identification, as well as the search for damaged pipe insulation and some types of cable faults.
1. Receiver
1. Input method: built-in receiving coil, identification clamp (optional), troubleshooting A-frame (optional).
2. Detection frequency:
256Hz, 286Hz, 320Hz, 380Hz, 460Hz, 640Hz, 1280Hz, 1860Hz, 512Hz, 570Hz, 577Hz, 640Hz, 760Hz, 870Hz, 920Hz, 940Hz, 8KHz, 9KHz, 33KHz, 65KHz, 83KHz, 131KHz, 200kHz,
Power frequency passive detection frequency: 50Hz/60Hz, radio passive detection frequency, low frequency.
3. Pipeline detection modes: wide peak method, narrow peak method, sound valley method, peak valley method.
4. Cable identification mode: caliper (optional) intelligent identification and current measurement.
5. Human-machine interface: 480×272 dot matrix LCD display.
6. Built-in battery: 4 18650 lithium-ion batteries, nominal 4.2V, 8.2Ah.
7. Positioning depth 0-6m; when measuring depth, the depth of the pipeline under test is 0-3m (accuracy ±5%), and the depth of the pipeline under test is 3-12m (accuracy ±10%)
2. Transmitter1. Output mode: direct output, induction, caliper coupling.
2. Output frequency: 256Hz, 286Hz, 320Hz, 380Hz, 460Hz, 640Hz, 1280Hz, 1860Hz, 512Hz, 570Hz, 577Hz, 640Hz, 760Hz, 870Hz, 920Hz, 940Hz, 8kHz, 9kHz, 33kHz, 65Hz, 83kHz, 131KHz, 200kHz .
3. Output power: maximum 10W, 10 levels adjustable, fully automatic real-time impedance matching.
4. Direct connection output voltage: up to 400Vpp.
5. Overload and short circuit protection.
6. Human-machine interface: 320×240 dot matrix LCD display.
7. Built-in battery: 6 18650 lithium-ion batteries, nominal 12.6V, 4.2Ah.
3.Others
1. Volume: transmitter 320×240×90mm, receiver 670×128×310mm.
2. Mass: transmitter 1.9kg, receiver 1.4kg.
3. Charger: input AC100~240V, 50/60Hz, output DC4.2V-1A, output DC12.6V-1A.
4. Conditions of use: Temperature: -20ºC-70ºC, humidity 5-90%RH, altitude <4500m.
Features
Compass and direction display: visually display the pipeline direction and left and right directions.
Current direction measurement, eliminating line interference (partial frequencies).
Depth and current measurement.
Fully digital high-precision sampling processing: stable and reliable, ultra-high sensitivity, extremely narrow receiving frequency band, strong anti-interference ability, and can fully suppress power frequency and harmonic interference from nearby running cables and pipelines.
Running cable detection: High-performance transmitting caliper, coupling the output signal to the running cable to the greatest extent.
Cable/pipeline identification: The flexible caliper (optional accessory) is easy to use and clearly gives the identification results; it can be used when it is inconvenient to use the caliper.
Ground fault finding: Use the A-frame (optional accessory) to locate the damaged point of the pipeline's insulation against the ground, and the arrow indicates the direction of the fault point.
Multiple detection frequencies: active detection and passive detection.
The transmitter has multiple signal output modes: direct output, caliper coupling, and induction.
Transmitter digital power amplifier power output, fully automatic impedance matching, fully automatic protection.
lBuilt-in large-capacity lithium-ion battery, automatic shutdown when under voltage, automatic shutdown (receiver) if no operation for a long time.
The casing is beautiful, sturdy, lightweight and portable.
| Serial number | Name | quantity |
|
1
|
Receiver | 1 |
|
2
|
Transmitter | 1 |
|
3
|
Direct signal line | 1 |
|
4
|
Coupling pliers | 2 |
|
5
|
Ground drill | 1 |
|
6
|
Transmitter Charger | 1 |
|
7
|
Receiver charger | 1 |
|
8
|
Coupling clamp cable | 1 |
|
9
|
A frame | 1 |
|
10
|
A frame cable | 1 |
){kind=link}