Product Description
Switchable English operating system
Product characteristics
1, 12.1 inch industrial computer control, touch operation mode;
2, XP operating system, convenient operation mode;
3, With the function of measuring wave speed and fault distance;
4, Automatic continuous sampling, waveform capture timely and accurate;
5, The instrument adopts the latest technology of embedded industrial computer with impact high-voltage flashover method and low-voltage pulse method;
6, With standard printer USB interface;
Technical parameter
| Sampling frequency |
400MHz |
| Low voltage pulse amplitude |
400V |
| Pulse width |
0.25uS/2uS/4uS |
| Minimum resolution |
0.1m |
| Test blind area |
≤10m |
| Range |
≥68km |
| Measurement error |
≤± (0.5% ×L+1m), L is the cable length |
| Test cable length |
< 1km (short distance); < 3km (medium distance); > 3 km (long distance) three kinds |
| Power supply |
Charging AC110V ~ 240V, 50Hz/60Hz;
Built-in 10400mAH lithium battery power supply; |
| Working conditions |
temperature -20ºC ~ +65ºC, relative humidity 90%, atmospheric pressure 750±30mmHg; |
| Volume and weight |
430×380×220mm-10kg; |
Packaging & Shipping
• Cable fault locator: The unit that uses low voltage pulse method and high voltage flashover method to test and analyze the cable;
• Stylus: easy to operate and touch the integrated screen, accurate positioning and selection of the display area;
• Output line (single Q line) : Connect the cable fault tester and the cable under test during the low-voltage pulse test method;
• Input line (double Q line) : Connect cable fault tester and sampler during high-voltage flashover test;
• Sampler: When the high-voltage flashover method, the signal that receives the high-voltage signal is reflected to the sampling ground;
• Power cable: cable fault tester charging cable;
Company Profile
FAQ
){kind=link}