| Customization: | Available |
|---|---|
| After-sales Service: | Warranty |
| Warranty: | 12 Month |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This device is a cart-type high-end experimental instrument that integrates a DC high-voltage source, an energy storage capacitor, a discharge ball device, an automatic discharge device, and a cable fault tester sampling module. This equipment completely solves the problems of ease of use, portability, safety and reliability of traditional experimental devices.
Features
1. It has automatic protection functions for overcurrent, overvoltage and overheating;
2. Super short-circuit protection function, which can make the high-voltage output directly short-circuit to ground;
3. It has dual 2.5-level pointer display for current and voltage, which is intuitive and clear; it is clear at a glance whether the fault point is fully discharged, and the discharge process is reflected in real time;
4. It has zero start protection and is safer and more reliable;
5. The high-voltage pulse output is uniform and controllable;
6. High-voltage side voltage measurement, real-time and accurate;
7. Unique high-voltage measurement design will automatically discharge the internal capacitor of the device when it is stopped;
8. The discharge time can be selected from two modes: timing and manual;
9. It has DC voltage withstand function;
10. Internally installed high-precision test cable fault sampling waveform module;
11. Humanized designed trolley for easy movement;
Operation panel introduction
1. Ammeter: Indication of current size.
2. Voltmeter: High-voltage output voltage indicator kV meter, divided into 8kV, 16kV, 32kV combined with voltage level switch reading.
3. High-voltage lamp (HV): On means there is high-voltage output, off means there is no high-voltage output.
4. Power lamp (Power): When the power switch is turned on, the indicator light is on.
5. Zero position lamp (Zero): Indicates that the voltage adjustment knob is in the zero position state. High voltage can only be started when the zero position lamp is on.
6. Overcurrent protection switch: Pressing the state indicates that the overcurrent protection function has started; when it pops up, it indicates that the instrument has triggered the overcurrent protection.
7. Power switch (Power Switch): Turn clockwise to turn on the system power supply, and counterclockwise to turn off the system power supply.
8. Single key (Single): When the mode selection key is in the Single function, this key is valid.
9. Mode selection (Mode select): It is divided into three modes: withstand voltage (DC), single (Single), and cycle (Cycle). DC is the withstand voltage function. When this function is selected, the cable will be subjected to withstand voltage test; Single is a manual function. When this function is selected, the high voltage will be started and then boosted. Pressing the Single key can manually trigger the impact discharge; Cycle is an automatic function. When this function is selected, the high voltage will be started and boosted. The instrument will automatically trigger the impact discharge for about 7 seconds.
10. Start button (Start): In the zero position state, press the start button, the high voltage will start, and the high voltage light will be on. In the non-zero position state, the high voltage light will not be on when started.
11. Voltage control knob (Voltage control): When this knob is in the zero position state, the zero position light will be on, and the high voltage can be started. The voltage can be boosted only after the high voltage is started.
12. Stop button (Stop): When the test is completed or an abnormality occurs, press this button to cut off the high voltage output, and the remaining high voltage of the test will also be automatically discharged.
13. Voltage select: This button has three voltage level modes: 8kV, 16kV, and 32kV. Please rotate it to the appropriate position before starting the machine. Lift, rotate, and press.
Technical Parameters
| Impact high voltage | 0~32kV, 0~16kV, 0~8kV three-speed adjustment |
| High voltage partial pressure | Level 2.5 |
| Built-in capacitor | 4μF/32kV, 16μF/16kV, 64μF/8kV three-speed adjustment |
| Output voltage polarity | negative polarity |
| Impact power | 2000W |
| Overcurrent protection | 9A (more than 5S) low voltage side |
| Discharge Power | 2048J |
| Working power supply | AC 220V±10%/50Hz±2Hz |
| Ambient temperature | -25~+65ºC |
| High voltage side current | 0~60mA |
| Impact time | automatic impact about 7 seconds, manual impact for any time control |
| Over-temperature protection | 105ºC |
| Volume | 740L×520W×880H |
| Weight | no more than 130kg |
){kind=link}