Product Description
The cable fault tester is suitable for measuring the low resistance, short circuit, open circuit fault, high resistance leakage and high resistance flashover fault of power cables, high frequency coaxial cables, local telephone cables, street lamps and buried wires of various materials with different cross sections and different media.
Detailed Photos
Product Parameters
Sampling frequency |
0 ~ 35kV |
Short-circuit current |
0 ~ 200mA |
Pulse amplitude |
100Vpp |
Pulse width |
0.1uS and 2uS |
Sampling frequency |
100MHz, minimum resolution 0.5m (100m/us) |
Sampling mode |
Automatic continuous sampling, never miss any discharge waveform |
Low-voltage pulse |
Width: 0.1uS and 2uS Amplitude: 100Vpp |
Output power |
Output power |
Technical parameter
1,Industrial 5.7LCD display - field of view >160°, working temperature -25 ° C ~ +65 ° C;
2,Single-chip centralized control, push-button operation mode, strong anti-interference ability;
3, With ranging, speed measurement, resistance and other functions;
4,Micro printer and host integration, can print test waveform and test report at any time
5, Automatic continuous sampling, never miss any discharge waveform
6, Test method: flashover sampling, low-voltage pulse sampling
7, Pulse amplitude: 100Vpp
8, Pulse width: 0.1uS and 2uS
9, Measuring distance: Smax: 30km Smin: 15m
10,Measurement error: coarse absolute error: ±10m coarse relative error: ± 1% (DL/T849.1-2004 specifies not more than ±(1%L+20)m, where: L is the cable length)
11, Power supply: built-in 24V/7Ah DC power supply, can work continuously for 6 hours It can also be connected to AC 220V 50Hz power supply