| After-sales Service: | 1 Year |
|---|---|
| Warranty: | Warranty Certificate |
| Test Mode: | Saved Test |
| Usage: | Digital Cable Tester |
| Test Region: | Forming Cable |
| Power: | Electricity |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Our company has long been committed to the research of cable fault testing. The cable fault intelligent tester has been used by thousands of users and has a high reputation in the field of power cable testing. The XHGX507 cable fault comprehensive tester developed by the company using the latest concept is especially suitable for fast and accurate positioning of cable-to-ground insulation faults, (live) path finding, cable identification, and deep positioning.
The XHGX507 cable fault comprehensive tester is designed based on the electromagnetic induction method and the application of the communication principle. Contains more user-friendly design in use. The large-screen LCD displays the signal strength, and the bars, arrows and voice prompts make it easy for the operator to determine the location of the cable underground and the point of failure. One person can complete all operations.
XHGX507 cable fault comprehensive tester can be used to find the cable (live or uncharged) path and identification, but also can be used to find the direct buried cable fault. It can complete tasks that were only possible with the past few sets of instruments.
The XHGX507 cable fault comprehensive tester changes the traditional cable fault location concept. It does not require high-voltage test equipment, AC power supply, and waveform analysis. The wiring is simple and clear, and the method of use is easy to learn. In the past, when we searched for the cable path and identified the cable, it was necessary to test the power failure of the cable, and some running cables could not be powered off, so that it can easily solve the problem of finding and identifying the path of the live cable. It can also directly find the path and identification of 50Hz live cables.
| Transmitter | |
| Working frequency | low frequency (815Hz), intermediate frequency (8kHz), high frequency (33 kHz), radio frequency (83 kHz) |
| Working mode | direct connection method, coupling method (caliper method), induction method |
| Matching load | 5 ohms-3000 ohms |
| Impedance display | 5 digits |
| Overheating and over current | automatic protection |
| Power output | low gear, middle gear, high gear |
| Receiver | |
| Working frequency | low frequency (815Hz), intermediate frequency (8kHz), high frequency (33 kHz), radio frequency (83 kHz), Passive frequency 50Hz |
| Antenna mode | valley method (zero value mode), crest method (peak mode), step voltage method and clamp current method (A-frame) |
| Current indication | display the effective current value of the cable under test (unit: mA) |
| Working temperature | -10ºC+55ºC |
| Power indicator | graphic display |
| Battery life | continuous work> 8 hours: intermittent work> 16 hours |
| Signal strength indication | ladder diagram, digital range 0-999 |
| Gain control | manual adjustment, dynamic range of 100dB |
| Detection depth | the maximum detection depth is not less than 5 meters |
| Maximum detection distance | The cable with good insulation can be up to 15km in the direct connection method |
| Depth measurement | press the depth key to display three digits, the maximum depth can be measured up to 10 meters |
| Accuracy | Low frequency: ±(1-5)%≤2.5m Radio frequency: ±(5-12)%≤2.5m |
|
Antenna pattern
|
the trough method (vertical coil), the peak method (horizontal coil)
|
|
Sound indication
|
signal intensity changes with the FM tone
|
|
Current indication
|
Display the current value of the effective cable under test (unit: mA)
|
|
Operating temperature
|
-10 ° C - +55 ° C
|
|
Battery Type
|
7.4V lithium battery
|
|
Battery indicator
|
graphics
|
|
Battery life
|
continuous > 8 hours: stopped working > 16 hours
|
|
Size
|
70cm × 20cm × 11cm
|
|
Weight
|
3 kg (with battery)
|
|
Signal strength, said
|
ladder, the number range 0 - 999
|
|
Gain Control
|
manually adjust the dynamic range of 100db
|
|
Detection depth
|
Maximum depth of not less than 2.5m probe
|
|
Maximum detection range
|
direct law insulated cable up to 15km
|
|
Depth measurement
|
according to the depth of three key figures, the maximum depth can be measured up to 2.5 m
|
|
Accuracy
|
LF: ± (1-5)% ≤ 2 5 meter RF: ± (5-12)% ≤ 2 5 meter
|
|
Operating frequency
|
low frequency, RF
|
|
Mode
|
direct method, coupling method, inductive method
|
|
Matched load
|
5 ohms -3000 ohms
|
|
Impedance display
|
five digits
|
|
Thermal over-current
|
automatic protection
|
|
Power output/low block,
|
high gear / mid-range,
|
|
Battery Type
|
7.4V lithium battery
|
|
Battery life
|
working 4-8 hours depending on use frequency, output power
|
|
Intermittent work
|
6-10 hours depending on the frequency of use, output power
|
|
Operating temperature
|
-10 ° C-55 ° C
|
|
Dimensions
|
16cm × 16cm × 39cm
|
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}