Xzh Test Manufacturer Integrated 32kv Portable Underground Cable Fault Locator System

• Customization: Available
• After-sales Service: Warranty Certificate
• Warranty: 12 Months
• Model NO.: XHHV535-4TSB
• Usage: Digital Cable Tester
• Power: Electricity
• Certification: CE, ISO
• Customized: Customized
• Color: Black
• Output Voltage: 0-8/16/32kv Adjustable
• Discharge Energy: 0-2048j
• Working Power: 2000W
• Transport Package: Wooden Case
• Trademark: XZH TEST
• Origin: China
• HS Code: 9031809090
• Production Capacity: 500PCS/Year

Product Description

Product Description

Features
• 10.1-inch full-color TFT touch screen;
• Embedded system, safe, stable, simple display and operation mode;
• With the function of testing cable wave velocity, cable length and fault distance;
• Fully automatic continuous sampling, waveform capture at all times, timely and accurate.
• With automatic test range setting, automatic waveform analysis and display of test distance.
• Full Chinese menu, touch and coding button two operation modes, simple, fast and reliable.
• With low-voltage pulse method, high-voltage flashover method, multiple pulse method (8 times) test technology, waveform display is smooth and easy to read.
• When using the multiple pulse method, it is used with a pulse coupler to display 8 groups of high and low voltage waveform comparisons, which is convenient for automatic test distance, manual analysis and distance measurement.
• The instrument has powerful data processing capabilities, which is convenient for users to manage and archive waveform files.
• It has a massive test waveform storage function: the waveforms tested on site can be conveniently stored in the instrument in the order specified by the Chinese naming regulations, so that they can be called up for observation and analysis at any time; it can store more than 8,000 low-voltage pulse and high-voltage flashover waveform records, and more than 250 multiple pulse waveform records. The waveform files can be imported into the computer software for management and analysis using USB communication.
• Ultra-high brightness, LED backlight brightness up to 280nit, resolution 1024*600, easy to operate in direct sunlight.
• Built-in large-capacity lithium battery pack, supports fast charging, and can be tested in an environment without power supply.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Technical specification
 

General features
Portable cable fault location system
Graphical interface	Graphical interface, more intuitive and easy to operate.
Operation	Turn and click a single knob (jog dial) on the control unit
Data management	General database
Data Synchronization	Universal Serial Bus
Control unit
Display	Industrial grade TFT color panel with LED backlight
Anti-glare	have
Multi-touch	have
LCD size	10"
Aspect Ratio	16:9
Resolution	1024 x 768 Full HD
Brightness	450 cd/m²
Safety
Adaptability	CE Compliance;EN 61010,EN 50191,VDE 0104,VDE 015,DGUV 203-034(BGI 891)
Discharge and grounding devices	72kJ, equivalent to the energy stored in a 10µF capacitor charged to 120kV DC fast charge: discharge time constant < 1 second
System Status	Real-time monitoring and indication
Intrinsically safe	Ground immediately when there is a power outage
F-U safety interlock	Operating voltage connection monitoring (high voltage circuit)
F-Ohm Safety Interlock	Operational earth connection monitoring (high voltage circuit)
Security Features	Front panel: power on/off, lockout button switch, emergency stop, residual pressure indicator light, high voltage switch; Control unit: Knob (jog dial)
Safety devices	System grounding status indicator, power input protection device, high voltage room monitoring through door contact, external safety device
Power input monitoring	Overvoltage protection, undervoltage protection, residual current device (RCD)
Defining Wiring	There is a switchboard inside the system

 

System function
1.Use DC or high-voltage pulse to make the cable fault point flash over and discharge 2.Use the traveling wave reflection principle to make a rough measurement of all types of cable main insulation faults
I,High voltage surge generator
Output mode	DC, Single, Cycle
Output voltage	8kV,16kV,32kV
Built-in capacitor	64uF,16uF,4uF
Discharge energy	2048J @ each voltage level
Impact power	2000VA
Impulse rate	Automatic impact for about 6 seconds, manual impact for any control time
Surge voltage levels switch	Manual
Voltage adjustment type	Continuous
Indication	High-voltage side voltage metering, indication of output voltage and current in real time
Operating modes switch	Manual
Coupler	Built-in multiple pulse sampling box
Safe protection	With zero start protection function, safe and reliable
Discharge	Unique high-voltage measurement design, in the stop state, it will automatically discharge the internal capacitance of the device
Working power	AC 220V±15% ,50Hz±2Hz(60Hz)
DC withstand voltage testing	Output voltage adjustable and indication range 0-32kV, output current indication range 0-20A
Burn current	Fault conditioning (burning) with current up to 60 mA @ 32 kV, 120 mA @ 16kV, 240mA@8kV
Safety	Over-voltage, Over-current, Overheating protection. Automatic discharge after operation
Protection rating	Not lower than IP54
Dimensions(mm)	534L×444W×805H mm
Total weight	Not more than 130kg
II,TDR cable fault locator
Test method	Low voltage pulse, Impulse current, Impulse voltage, ARC multipls pulse
Sampling rate	1MHz~400MHz
Pulse output	Unipolar
Pulse Amplitude	300V
Pulse width	0.15μS/0.30μS /0.60μS/1.20μS/2.4μS/5.0μS/7.5μS/10μS
Measurement scope	≥120km
Measurement range	100m/300m/500m/1km/3km/5km/10km/25km/50km/100km
Minimum resolution	0.07m
Measurement error	≤±(0.5%×L+1m),L is cable length
Signal gain	0…100%,adjustable
Propagation speed	10…999.9m/µs
Output Impedance	Automatic match
Trigger	Automatic continute
Result analysis	Automatic measure fault distance
Working conditions	temperature -25ºC~+65ºC, relative humidity 85%, atmospheric pressure 750±30mmHg
IV Test cables
(Note: Due to the existence of 35kV high voltage, special high voltage cables are made and should be kept away from the site during operation.)
High voltage output cable	core wire 2.5mm2 red, withstand voltage 50kV DC, with shielding layer, outer diameter 14mm, length can be customized according to customer's requirements, including installation of large spool.
Ground cable	grounding 3-column - main core 16mm2 transparent color, branch 2.5mm2,  length can be customized according to customer's requirements, including installation of small spool.

---------------------------------------------------------------------------------------------------------------------------------------------------------
Equipment Testing

                                    Low voltage pulse testing                                                                                ARC multiple pulse testing

This device can use the multiple pulse method to measure distance, and only one short-circuit wire is needed. In addition, when accurately locating the cable fault, it can also be switched to the high-voltage flash-over method (pulse current method - ICE), just remove the short-circuit wire and insert the high-voltage output cable into another HV output port. This ensures high energy output during accurate locating, and will not reduce part of the energy due to the multiple pulse coupler, resulting in less clear sound when listening to the fault discharge sound.

XZH TEST cable fault detection site

 

 

Cable fault pinpointer  MODEL XHDD503C

 

1 Adjustment: Press the adjustment button to enter the adjustment interface, and rotate the adjustment button to set the adjustment parameters;
2 Power supply: Turn on and off the power supply of the system. When turning on the system, you need to press and hold the power button for 3 to 4 seconds until you hear a long "beep" sound, then you can lift the button; when turning off, you need to press and hold the power button for 3 to 4 seconds;
3 Display: 5-inch touch display.
 

1 Sensor: Probe sensor connection port;
2 Charging: charger connection port;
3 Dedicated headphone jack.
 

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------




Packing list

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Instrument composition
1. Cable fault test system: Use low-voltage pulse method, high-voltage flashover method, and multiple pulse method to test and analyze cables and apply high voltage and high-energy pulse signals to the tested cables;
2. Output line (5-meter single Q line): Connect the cable fault tester and the tested cable during low-voltage pulse test;
3. Charger: 12.6V/3A charger, connected to the instrument charging port for charging;
4. USB cable: used when importing waveform files to the computer.
5. High-voltage output line (5 meters): connect the high-voltage output terminal of the host and the cable core under test;
6. High-voltage connecting line (0.5 meters): short-circuit the high-voltage flashover output terminal and the multiple pulse input terminal during the multiple pulse method test;
7. Ground line (5 meters): sampling ground, high-voltage ground and discharge rod ground line;
8. Power line (1.8 meters): instrument working power line;
9. Discharge rod: perform DC current limiting discharge or DC short-circuit discharge at the cable end under test;
10. Fuse: AC220V power supply system spare fuse (8A fuse).

 

Welcome you contact us for more detail information and service.

 

Company Profile