| Customization: | Available |
|---|---|
| After-sales Service: | Warranty Certificate |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Function | Pipeline detection (cable position tracking, direction display, depth measurement, current measurement), cable identification, A-frame fault finding (optional function) |
| Power | 8.4V large capacity rechargeable lithium battery |
| Input method | Built-in receiving coil, flexible caliper, A-frame (optional function) |
| Receiving frequency | Active detection frequency: 640Hz, 1.28kHz, 2.56kHz, 3.20kHz, 4.09kHz, 8.19kHz, 10.2kHz, 32.7kHz, 65.6kHz, 81.9kHz, 197kHz Power frequency passive detection frequency: 50Hz, 60Hz, 250Hz RF passive detection frequency band: center frequency is divided into 32.7kHz, 65.6kHz, 81.9kHz, 197kHz |
| Pipeline detection mode | Broad peak method, narrow peak method, valley method |
| Pipeline detection Detection range |
Direct connection method: Generally, the cable length can reach 0~20 km, which is mainly determined by the ground resistance, cable resistance and cable buried depth Coupling method: Generally, the cable length can reach 0~10 km, which is mainly determined by the ground resistance, cable resistance and cable buried depth Induction method: Applicable to cables buried less than 2m deep |
| Depth and Current | Real-time display of cable depth and current value |
| Pipeline measurement depth | 0-20m |
| Depth Accuracy | Plane position precision: Center axis position of target cable or pipeline: ±5% (buried depth 0-3m) -10% (buried depth 3m-20m) |
| True or False Tips | Eliminate interference from adjacent cables. When measuring adjacent cables, the measurement of adjacent cables can be distinguished based on the different signal strengths and measured current phases fed back by the adjacent cables. In the process of tracing the cables, observe the phase dial and pointer pointing to distinguish the measured cable from the adjacent cables. |
| Sound Instructions | FM tone that varies with signal strength |
| Anti-interference display | Green: No interference Green: Good (results can be trusted) Red: Severe interference (results cannot be trusted) |
| Anti-interference ability | The extremely narrow receiving frequency band and unique digital processing method can fully suppress the power frequency and harmonic interference of nearby running cables and pipelines. |
| Interference distance | When using the coupling method and the induction method, the transmitter will generate interference within a short distance. The interference distance is related to the transmission power and frequency. The greater the power and the higher the frequency, the stronger the interference. The minimum distance at which the receiver is not interfered by the transmitter often needs to be determined by experiment: Pipeline detection: 5m away for the coupling method and 20m away for the induction method can be confirmed as no interference Cable identification: 2~5m away for the coupling method can be confirmed as no interference |
| Cable identification | Identification method: Intelligent identification by flexible clamps; Number of cables that can be calibrated: 1 to 20; Calibration value: The current percentage of the receiving signal and the transmitting signal is between 75% and 135% of the calibration value, which is one of the conditions for successful identification; Directionality: The transmitting clamp, the receiving clamp and the loading signal must be in the same direction, which is one of the conditions for successful identification. |
| Cable identification Detection range |
Direct connection method: can identify signals with a loop resistance of 0Ω to 8kΩ (usually can reach a cable length of 0 to 20 kilometers, mainly determined by the ground resistance and cable resistance) Coupling method: can identify signals with a loop resistance of 0Ω to 1kΩ; (usually can reach a cable length of 0 to 6 kilometers, mainly determined by the ground resistance and cable resistance) |
| Display | 4.3-inch LCD color screen (high brightness screen), visible in sunlight |
| Touch | Yes, capacitive touch |
| size | Approx. 350mm(L)×155mm(W)×700mm(H) |
| Weight | Approx. 2kg |
| Connection interface | Type-C USB port, aviation socket |
| Coil inner diameter | φ200mm (larger diameter can be customized as needed) |
| Working temperature and humidity | -10ºC~40ºC; below 80%Rh |
| Storage temperature and humidity | -10ºC~50ºC; ≤95%RH, no condensation |
| Pressure resistance | AC2000V/rms (before the front and rear ends of the shell) |
| Suitable for safety regulations | IEC61010-1 CAT 600V, IEC61010-031, IEC61326, pollution degree 2 |
| Function | Multiple frequency signal transmission modes |
| Power | 10.8V large capacity rechargeable lithium battery |
| Output method | Direct connection method, coupling method, induction method |
| Output frequency | 640Hz,1.28kHz,2.56kHz,3.20kHz,4.09kHz,8.19kHz,10.2kHz,32.7kHz, 65.6kHz,81.9kHz,197kHz |
| Output Mode | Automatic identification, automatic identification according to different accessories |
| Output Power | 15W max, 9 levels adjustable |
| Impedance | Fully automatic real-time impedance matching and protection function |
| Direct output voltage | 150Vpp max |
| Circuit Protection | With overload and short circuit protection |
| Liquid crystal | 5 inch LCD color screen |
| Touch | Yes, capacitive touch |
| Instrument size | Approx. 320mm(L)×275mm(W)×145mm(H) |
| Weight | Transmitter is about 3.85kg; Transmitter clamp is about 1.18kg |
| Charger | DC 11.1V 3A |
| Launching clamp size | Length, width and thickness: 297mm×194mm×39mm |
| Inner diameter of firing clamp | φ125mm |
| Transmitter cable length | 3m |
| Test line | Red test lead 3m, black test lead 3m |
| Connection interface | USB port, DC port, aviation socket |
| Pressure withstand | The transmitter adopts an integrated special tool box design, and the box can withstand a pressure of about 200kg. |
| Voltage withstand | AC 3700V/rms (between the top and bottom of the instrument box) |
| Electromagnetic properties | IEC61326(EMC) |
| Suitable for safety regulations | IEC61010-1 (CAT 300V, CAT IV 150V, pollution degree 2) |
){kind=link}