Customization: | Available |
---|---|
After-sales Service: | Warranty |
Warranty: | 12mouth |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The cable piercing device is divided into two parts: the shooter and the controller: the shooter of the cable piercing device is a low-speed piston type special device designed for piercing cables. Its structure is reasonable and lightweight, and it is extremely convenient to install and fix. Can be installed at any angle. The controller of the cable tying device uses advanced electronic detection circuits. The cable tying device can remotely fire a nail at the cable, causing a short circuit in the cable. If the cable is charged, it will fire and discharge. If it is not powered, it means the cable has been powered off.
Features:
1. When the angle between the two guns is not 120°, at least one gun body can achieve the purpose of stabbing and form a short circuit point;Shooting device | 2 gun bodies; |
Remote control distance | greater than 10 meters, can be remote controlled across the wall; |
Control line length | 5 meters; |
Clamp diameter | φ30-150mm; |
Working power supply | charging AC 220V/50Hz, built-in battery can work continuously for more than 10 hours; |
Controller | 270×230×120mm 2.5kg; |
Complete set | 470×380×210mm 15.5kg (double gun 506Y). |
Cable diameter mm | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 |
Nail specifications | PS27C8 | PS37C8 | PS47C8 | PS52C8 |
Specification | black | blue | yellow | red | Recommended Use | 35kV and below | 35kV and above |
Power | smallest | Small | middle | big | Use S1 yellow | Use S1 red (6.8*11mm) |