Xzh Factory Low Voltage 400V 11kv Underground Cable Fault Locator System Tdr

• Customization: Available
• After-sales Service: Warranty Certificate
• Warranty: 12 Months
• Model NO.: 502A2+503C+507C+535-2L
• Usage: Digital Cable Tester
• Cable Type: Shielded and Unshielded
• Power: Electricity
• Certification: CE
• Customized: Customized
• Color: Black
• Transport Package: Wooden Case Filled with Foam
• Trademark: XZH TEST
• Origin: China Xi′an
• Production Capacity: 100 Pieces /Year

Product Description

 

 

Portable cable fault location system
502A2+503C+507C+535-2L


 

System function
1.Use DC or high-voltage pulse to make the cable fault point flash over and discharge 2.Use the traveling wave reflection principle to make a rough measurement of all types of cable main insulation faults 3.Use the acoustic-magnetic synchronization method to make a precise measurement of all types of cable main insulation fault
I,High voltage surge generator XHHV535-2L
Output mode	EMP(impulse), DC(withstand voltage)
Output voltage	0-32kV
Built-in capacitor	2μF
Discharge energy	Max. 1024J
Impact power	250W peak
Impulse rate	Automatic impact for about 6 seconds
Surge voltage levels switch	Manual
Voltage adjustment type	Continuous
Indication	High-voltage side voltage metering, indication of output voltage and current in real time
Operating modes switch	Manual
Minimum Output current in DC mode	7.5mA at 32kV
Safe protection	With zero start protection function, safe and reliable
Discharge	Unique high-voltage measurement design, in the stop state, it will automatically discharge the internal capacitance of the device
Working power	AC 220V±15% ,50Hz±1Hz(60Hz)
DC withstand voltage testing	Output voltage adjustable and indication range 0-32kV, output current indication range 0-20A
Safety	Over-voltage, Over-current, Overheating protection. Automatic discharge after operation
Protection rating	Not lower than IP54
Total weight	Not more than 30kg
II,TDR cable fault locator XHGG502A2
Test method	Low voltage pulse, Impulse current(high voltage flashover)
Sampling rate	80MHz
Pulse output	Unipolar
Pulse Amplitude	100V±15%
Pulse width	0.125uS/0.50uS/2.50uS/7.25uS/10.0uS
Measurement scope	≥65km
Measurement range	300m/1km/5km/25km/65km
Minimum resolution	0.1m
Measurement error	≤±(0.5%×L+1m),L is cable length
Signal gain	0…100%,adjustable
Propagation speed	10…999.9m/µs
Output Impedance	Automatic match
Trigger	Automatic continute
Working conditions	temperature -25ºC~+65ºC, relative humidity 85%, atmospheric pressure 750±30mmHg
III,Cable fault pinpointer XHDD503C
Fixed-point mode	Standard mode, enhanced mode, noise reduction mode, custom mode (ms, waveform)
Fixed point method	Intelligent time difference method, electromagnetic inspection method, acoustic measurement method
Positioning accuracy	Fixed point: 0.1m, Path: 0.1m
Display	TFT ultra-bright 5-inch, 800×480 true color
language	Graphical language is more intuitive
Gain	120dB, fully automatic adjustment, also can be adjusted manually
Frequency range	100~1600Hz
Dynamic Range	0~112dB(16 gears)
Synchronous trigger	Acoustic fully automatic synchronous trigger; magnetic field fully automatic synchronous trigger
Detection range	0.00~99.99ms,75mV~75V
Probe	Automatic mute, fully digital metal intelligent probe
Headphone	600Ω military-grade strong noise reduction and anti-interference technology
Working power	4*18650 Standard lithium battery
Working hours	More than 8 hours
Ambient temperature	-25~65ºC; relative humidity: ≤90%
Weight	Host 0.6kg; Sensor 1.4kg
Waterproof grade	IP65
IV,Cable path comprehensive tester XHGX507C
Receiver
Function		Pipeline detection (cable position tracking, direction display, depth measurement, current measurement), cable identification, A-frame fault finding (optional function)
Power		8.4V large capacity rechargeable lithium battery
Input method		Built-in receiving coil, flexible caliper, A-frame (optional function)

XHGG502A2

Description
The cable fault tester adopts an industrial-grade 10.1-inch touch-integrated computer, a simple operating software interface, industrial-grade integrated circuits and devices, and a built-in large-capacity lithium-ion battery, which is stable, reliable, and easy to use.

This cable fault tester is a special instrument for measuring and analyzing the status and fault distance of power cables. This cable fault tester uses a combination of modern electronic technology and computer technology to achieve signal filtering, acquisition, data processing, graphic display, and graphic analysis. Cable speed measurement, cable length test, cable fault distance test.

This cable fault tester is suitable for low-resistance, short-circuit, open-circuit and disconnection faults of power cables, high-frequency coaxial cables, street light cables, and buried wires made of various materials with different cross-sections and media, as well as high-resistance leakage and high-resistance flashover. Network failure. The technical parameters comply with "GB/T 18268.1 Anti-interference requirements for test equipment used in industrial sites", "DL/T 849.1-2019 General technical conditions for special testers for power equipment Part 1: Cable fault flash tester", "JJF1042-2020" "Calibration Specifications for Cable Fault Testers" standard requirements.
Work mode: TDR(low voltage pulse), High voltage flashover( ICE(Impulse current)/Decay)

Features
• 10.1-inch full-color TFT touch display;
• Embedded system, safe, stable and simple display and operation mode;
• With the function of testing cable wave speed, cable length and fault distance;
• Fully automatic continuous sampling, waveform capture at all times, timely and accurate.
• Equipped with automatic test range setting, automatic waveform analysis and display of test distance.
• Full English menu, two operation methods of touch and coded buttons, simple, fast and reliable.
• Equipped with testing technology of low-voltage pulse method, high-voltage flashover method, the waveform display is smooth and easy to interpret.
• The instrument has powerful data processing capabilities, making it convenient for users to manage and archive waveform files.
• Has a massive test waveform storage function: the waveforms tested on site can be conveniently stored in the instrument in the order specified by Chinese naming for recall and observation at any time; it can store more than 8,000 records of low-voltage pulses and high-voltage flashover waveforms, and multiple pulses More than 250 waveform records can be recorded, and waveform files can be imported into computer software for management and analysis using USB communication.
• Ultra-high brightness, LED backlight brightness reaches 280nit, resolution 1024*600, convenient for environments exposed to direct sunlight in operation.

Technical specification
 

Sampling frequency	80MHz
Low voltage pulse amplitude	100V±15%
Ranging range	≥65km
Test range	300m/1km/5km/25km/65km
Pulse width	0.125uS/0.50uS/2.50uS/7.25uS/10.0uS
Minimum resolution	0.1m
Test blind area	≤20m
Measurement error	≤±(0.5%×L+1m), L is the cable length
Power supply mode	charging AC110V~240V, 50Hz/60Hz
Volume and weight	L358mm×W284mm×H168mm-4.7kg
Working conditions	Temperature -20ºC~+65ºC, relative humidity 90%, atmospheric pressure 750±30mmHg

Packing list

 

 

XHDD503C

Introduction
The cable fault location instrument uses the acoustic and magnetic synchronization method to determine the power cable fault point. The electronic flashover is generated by the impact discharge generator, picked up and amplified by the corresponding probe, and the precise location of the fault point is determined by auditory and visual judgment. It is a device that completes the precise positioning of the cable fault point within the rough measurement range and collects the acoustic and magnetic time difference. It integrates positioning technology, path-assisted testing and other technologies, providing multiple test modes and rich and diverse prompt information to efficiently and accurately complete cable fault location.

1. Technical indicators

1	Filter parameters	All-pass: 100Hz~1600Hz. Low pass: 100Hz~300Hz. Qualcomm: 160Hz~1600Hz. Bandpass: 200Hz~600Hz.
2	Channel gain	8 levels adjustable.
3	Magnetic channel gain	8 levels adjustable.
4	Output gain	16 levels (0~112db)
5	Output impedance	350Ω
6	Acoustomagnetic positioning accuracy	less than 0.2m.
7	Path identification accuracy	less than 0.5m.
8	Power supply	4*18650 standard lithium batteries.
9	Standby time	more than 8 hours.
10	Volume	428L×350W×230H
11	Screen pixels	854-480
12	Brightness	800nit
13	Transmission speed unit	0-100ms
14	Accuracy	1ms
15	Sound bandwidth	100-1.6khz
16	Magnetic coil bandwidth	100-20kHZ
17	Both sound and magnetism are	greater than 75db
18	Weight	6.5kg.
19	Ambient temperature	-25~65ºC; Relative humidity: ≤90%.

Operation panel introduction

1 Adjustment: Press the adjustment button to enter the adjustment interface, and rotate the adjustment button to set the adjustment parameters;
2 Power supply: Turn on and off the power supply of the system. When turning on the system, you need to press and hold the power button for 3 to 4 seconds until you hear a long "beep" sound, then you can lift the button; when turning off, you need to press and hold the power button for 3 to 4 seconds;
3 Display: 5-inch touch display.

1 Sensor: Probe sensor connection port;
2 Charging: charger connection port;
3 Dedicated headphone jack.

Packing list

XHGX507C

Introduction

XHGX507C is a path detection instrument with strong comprehensive performance.
It has multiple functions such as pipeline path detection, cable identification, fault finding, etc. The instrument consists of a transmitter, a transmitting current clamp,a receiver, a receiving flexible current clamp, a connecting test line, and an A-frame (optional).

 Technical specification

 

Function	Pipeline detection (cable position tracking, direction display, depth measurement, current measurement), cable identification, A-frame fault finding (optional function)
Power	8.4V large capacity rechargeable lithium battery
Input method	Built-in receiving coil, flexible caliper, A-frame (optional function)
Receiving frequency	Active detection frequency: 640Hz, 1.28kHz, 2.56kHz, 3.20kHz, 4.09kHz, 8.19kHz, 10.2kHz, 32.7kHz, 65.6kHz, 81.9kHz, 197kHz Power frequency passive detection frequency: 50Hz, 60Hz, 250Hz RF passive detection frequency band: center frequency is divided into 32.7kHz, 65.6kHz, 81.9kHz, 197kHz
Pipeline detection mode	Broad peak method, narrow peak method, valley method
Pipeline detection Detection range	Direct connection method: Generally, the cable length can reach 0~20 km, which is mainly determined by the ground resistance, cable resistance and cable buried depth Coupling method: Generally, the cable length can reach 0~10 km, which is mainly determined by the ground resistance, cable resistance and cable buried depth Induction method: Applicable to cables buried less than 2m deep
Depth and Current	Real-time display of cable depth and current value
Pipeline measurement depth	0-20m
Depth Accuracy	Plane position precision: Center axis position of target cable or pipeline: ±5% (buried depth 0-3m) -10% (buried depth 3m-20m)
True or False Tips	Eliminate interference from adjacent cables. When measuring adjacent cables, the measurement of adjacent cables can be distinguished based on the different signal strengths and measured current phases fed back by the adjacent cables. In the process of tracing the cables, observe the phase dial and pointer pointing to distinguish the measured cable from the adjacent cables.
Sound Instructions	FM tone that varies with signal strength
Anti-interference display	Green: No interference Green: Good (results can be trusted) Red: Severe interference (results cannot be trusted)
Anti-interference ability	The extremely narrow receiving frequency band and unique digital processing method can fully suppress the power frequency and harmonic interference of nearby running cables and pipelines.
Interference distance	When using the coupling method and the induction method, the transmitter will generate interference within a short distance. The interference distance is related to the transmission power and frequency. The greater the power and the higher the frequency, the stronger the interference. The minimum distance at which the receiver is not interfered by the transmitter often needs to be determined by experiment: Pipeline detection: 5m away for the coupling method and 20m away for the induction method can be confirmed as no interference Cable identification: 2~5m away for the coupling method can be confirmed as no interference
Cable identification	Identification method: Intelligent identification by flexible clamps; Number of cables that can be calibrated: 1 to 20; Calibration value: The current percentage of the receiving signal and the transmitting signal is between 75% and 135% of the calibration value, which is one of the conditions for successful identification; Directionality: The transmitting clamp, the receiving clamp and the loading signal must be in the same direction, which is one of the conditions for successful identification.
Cable identification Detection range	Direct connection method: can identify signals with a loop resistance of 0Ω to 8kΩ (usually can reach a cable length of 0 to 20 kilometers, mainly determined by the ground resistance and cable resistance) Coupling method: can identify signals with a loop resistance of 0Ω to 1kΩ; (usually can reach a cable length of 0 to 6 kilometers, mainly determined by the ground resistance and cable resistance)
Display	4.3-inch LCD color screen (high brightness screen), visible in sunlight
Touch	Yes, capacitive touch
size	Approx. 350mm(L)×155mm(W)×700mm(H)
Weight	Approx. 2kg
Connection interface	Type-C USB port, aviation socket
Coil inner diameter	φ200mm (larger diameter can be customized as needed)
Working temperature and humidity	-10ºC~40ºC; below 80%Rh
Storage temperature and humidity	-10ºC~50ºC; ≤95%RH, no condensation
Pressure resistance	AC2000V/rms (before the front and rear ends of the shell)
Suitable for safety regulations	IEC61010-1 CAT 600V, IEC61010-031, IEC61326, pollution degree 2

Packing list
 

Transmitter	1
Receiver	1
Toolkit	1
Transmitting current clamp	1
Receiver Flexible Current Clamp	1
Direct-connect test clamp	1
Double-ended alligator clip test lead	1
Ground pin	1
Receiver Charger	1
Transmitter Charger	1
A frame	1

 

XHHV535-2L

The XHHV535-2L high voltage pulse generator is mainly used for shock discharge during low-voltage cable fault testing. The equipment completely replaces the traditional test transformer, operation box and pulse energy storage capacitor weighing hundreds of kilograms, and integrates the energy storage capacitor, DC high voltage source, and discharge ball gap. It adopts high precision, high stability special high voltage electronic components and high-frequency technology, simple structure, ultra-light weight, and user-friendly design and operation mode, which is safe and reliable.

The XHHV535-2L High voltage pulse generator with over-current, over-voltage, over-heating automatic protection function, When working, the high-voltage pulse output is uniform and controllable. The panel is equipped with a relay, and the discharge time interval can be arbitrarily set within 0-100 seconds.

This high voltage surge generator has a super short circuit protection function, which can make the high voltage output work directly to the ground.

With 1.5 level. The voltage pointer meter shows that the impact discharge process is clearly visible. In addition, it measures the high-voltage side voltage, making the measurement accurate in real time. It has zero start protection and potentiometer zero output function. In the stop state, the voltmeter can indicate the capacitor voltage in real time, which is convenient for users to check and discharge after operation.




Technical parameters

Impact high voltage	0~32kV
High voltage partial pressure	2.5 level
Built-in capacitor	2μF
Discharge power	0-1024J
Output voltage polarity	negative polarity
Impact power	250W@peak
Working mode	Selectable or adjustable impulse rate and Single shot
Minimum Output current in DC mode	7.5mA at 32kV
Length of test cable	The high-voltage output line of the pull-rod type high-voltage pulse generator is 2 meters long, the ground line is 3 meters long, and the power line is 1.8 meters long.
Over temperature protection	65ºC
Over current protection	8mA (more than 3 seconds)
Volume(mm)	540L×300W×450H
Weight	not more than 25kg
Power supply	AC220V±15%, 50Hz±2Hz(60Hz)
Ambient temperature	-20~+60ºC
Cable length	High voltage output cable - 2 meters, ground wires - 2.5 meters, power cable - 1.8 meters.

Packing List

Welcome you contact us for more information ^_^.