33kv and Below Voltage Intelligent Portable Underground Cable Fault Locator Set

• Customization: Available
• After-sales Service: Warranty
• Warranty: 12 Mouth
• Model NO.: XHHV535-4TS+XHGG502+XHDD503C+XHGX507
• Usage: Audio Cable Tester, Coaxial Cable Tester, Digital Cable Tester
• Power: Electricity
• Certification: CE
• Customized: Customized
• Color: Black
• Impact Voltage: 0~8/16/32kv(Square Wave)
• Impact Power: 2000W
• Discharge Energy: 2048j at 8kv/16kv/32kv
• High Voltage Side Current: 0~60mA
• Built-in Capacitor: 4μf/32kv, 16μf/16kv, 64μf/8kv
• Transport Package: Wooden Box with Foam Inside
• Trademark: XZH TEST
• Origin: China Xi&an
• HS Code: 9031809090
• Production Capacity: 1000

Product Description

Product Description

XZH Portable low and medium voltage cable fault locating system

Cable fault pre-location: with the reflectometer XHGG502 based on the low-voltage impulse reflection method(TDR), and high-voltage decay(ICE) method (DECAY)and(ARC)method.

XHDD503C uses acoustic-magnetic synchronization method, equipped with 2048 J surge generator and intelligent digital signal receiver.

Cable pipe locator: XHLJ507 is an multifunctional equipment, with this equipment, you can realize of cable path tracing, buried depth detection, cable fault point precise location.

High voltage 2048 J surge generator XHHV535-4TS is accompanied by a surge levels switch which allows to achieve the maximum surge impulse energy at 8, 16 and 32 kV. It has features operator safety assurance systems and provides a reliable and comprehensive technical solution for low- and medium-voltage cables faults.

 

XHGG502	Cable fault pre locator
XHDD503C	Cable fault pinpointer
XHGX507	Cable route tracer/Cable pipe locator
XHHV535-4TS	High voltage surge generator

 

Technical specification

XHGG502
 

Main features
• The reflected signal sent by the pulse coupler is automatically displayed, and the full-length waveform of the cable open circuit is displayed at the same time.
• Automatic calculation and display of fault distance;
• It has the function of storing massive test waveforms: the waveforms obtained from the field test can be conveniently stored in the instrument according to the specified order, and can be recalled and observed at any time;
• With standard printer USB interface;
• Simple operation and high reliability. Has a very high cost performance;
• Built-in polymer lithium battery power supply, which can test cable open circuit and low resistance short circuit fault in no power supply environment.


The test working modes of XHGG502 ARC cable fault pre locator include low voltage pulse method, high voltage flashover method, and multiple pulse method. Here focus on the multiple pulse method that is different from other devices.
 

                The below picture shows low voltage pulse test mode of XHGG502, test cable length, cable open circuit fault distance,                  short circuit fault distance.
               The below picture shows high voltage flashover test mode of XHGG502, measured cable fault distance.


 

Sampling frequency	400MHz
Minimum resolution	0.5m (100m/us)
Low voltage pulse width	0.2uS/2uS/4uS
Test blind zone	≤20m
Ranging range	≥68km
Measurement error	≤±(0.5%×L+1m), L is the cable length
There are three test cable lengths	<1km (short distance); <3km (medium distance); >3km (long distance), (low-voltage pulse test amplitude: 400Vpp)
Pulse coupler withstand voltage	DC 35kV
Measuring pulse	Low voltage pulse 300V±10%
Output impedance	350 Ohm
Input signal gain	±64dB
Power consumption	120VA
propagation speed factor	10-300m/μs
Working conditions	temperature -25ºC~+65ºC, relative humidity 85%, atmospheric pressure 750±30mmHg
Volume and weight	Cable fault tester 430×380×220mm-10kg; Pulse coupler 430×380×220mm-10kg

XHDD503C
The cable fault location instrument uses the acoustic and magnetic synchronization method to determine the power cable fault point. The electronic flashover is generated by the impact discharge generator, picked up and amplified by the corresponding probe, and the precise location of the fault point is determined by auditory and visual judgment. It is a device that completes the precise positioning of the cable fault point within the rough measurement range and collects the acoustic and magnetic time difference. It integrates positioning technology, path-assisted testing and other technologies, providing multiple test modes and rich and diverse prompt information to efficiently and accurately complete cable fault location.

This cable fault pinpointer is suitable for low-resistance, short-circuit, open-circuit and disconnection faults of power cables, high-frequency coaxial cables, street light cables, and buried wires made of various materials with different cross-sections and media, as well as high-resistance leakage and high-resistance flashover. Fault. The technical parameters comply with "GB/T 18268.1 Anti-interference requirements for test equipment used in industrial sites".



 

1	Filter parameters	All-pass: 100Hz~1600Hz. Low pass: 100Hz~300Hz. Qualcomm: 160Hz~1600Hz. Bandpass: 200Hz~600Hz.
2	Channel gain	8 levels adjustable.
3	Magnetic channel gain	8 levels adjustable.
4	Output gain	16 levels (0~112db)
5	Output impedance	350Ω
6	Acoustomagnetic positioning accuracy	less than 0.2m.
7	Path identification accuracy	less than 0.5m.
8	Power supply	4*18650 standard lithium batteries.
9	Standby time	more than 8 hours.
10	Volume	428L×350W×230H
11	Screen pixels	854-480
12	Brightness	800nit
13	Transmission speed unit	0-100ms
14	Accuracy	1ms
15	Sound bandwidth	100-1.6khz
16	Magnetic coil bandwidth	100-20kHZ
17	Both sound and magnetism are	greater than 75db
18	Weight	6.5kg.
19	Ambient temperature	-25~65ºC; Relative humidity: ≤90%.

 

XHHV535-4TS 

The XHHV535-4TS high voltage pulse generator can be used impulse discharge and withstand voltage test in low and high voltage cable fault test. High-precision test cable fault sampling waveform module and small transformer are installed inside, which can truly achieve the effect of not being damaged by impact, and it also has the functions of automatic timing impact, manual impact and withstand voltage test.

High voltage surge generator XHHV535-4TS	Surge voltage levels and adjustment ranges	Level 1 : 0-8KV Level 2: 0-16KV Level 3: 0-32KV
	Surge voltage levels switch	Manual
	Voltage adjustment type	Continuous
	Indication	High-voltage side voltage metering, indication of output voltage and current in real time
	Surge energy at each level	Up to 2048J
	Operating mode	Single trigger, cycle, DC
	Operating modes switch	Manual
	Impact time	about 7 seconds for automatic impact, arbitrary control time for manual impact
	Impact power	2KVA
	Continuous output current	60mA
	Built-in capacitor	4μF/32kV, 16μF/16kV, 64μF/8kV three-speed adjustment
	Safe operation	With zero start protection function, safe and reliable
	Discharge	Unique high-voltage measurement design, in the stop state, it will automatically discharge the internal capacitance of the device
	Working power	AC 220V±10% 50Hz±2Hz (other voltage and frequency can be customized)
	DC withstand voltage testing	Output voltage adjustment and indication range 0-32KV, Output current indication range 0-20A
	Burn current	Fault conditioning (burning) with current up to 60 mA @ 32 kV, 120 mA @ 16kV, 240mA@8kV.
	Connecting cable	High voltage output cable: 5m, Protective earthing cable:5m,power cord 2.5m. Cables can be customized according to customer requirements.
	Safety	Over-voltage, Over-current, Overheating protection. Automatic discharge after operation.
	Protection rating	Not lower than IP54
	Working power	AC 220V±15%, 50Hz±2Hz
	Dimensions(mm)	534L×444W×805H
	Total weight	About 120kg

If you want to know more product-related information, please contact me,
I will be honored to answer your questions